FG Series

Press Speed
May be printed at speeds of 150 to 350 m/min using the appropriate reducers Printing Viscosities Inks
must thoroughly be stirred and homogeneous before reducing with solvent. The optimum printing
viscosity depends on press and running conditions (18-20 sec/cup4 at temp. 25).
*Substrate to be printed needs to have a corona treatment of min 38 dyn/cm. Since the FG Series is
designed for reverse printing and lamination applications, it has no scratch and rub resistance.
Adhesion promoter added to the ink about % 3-5 ratio to increase heat and adhesion resistance.
By adding 7o 0.5 - 1 ratio of anti-scratch, could give scratch and rub resistance to the ink and could be
used for surface printing applications.
Anti-scratch added inks cannot be used for Lamination applications.
Colour range: WHITE and CMYK for this ink series
Other colours can be determined from the Pantone or according to customer sample.
Stir ink in a homogenous manner before use.
Do not mix any other series of inks.
Store inks in 20-25'C conditions to avoid discoloration and viscosity problems.
Sealed drums are under guarantee for 12 months after production date
since they are kept in a dry area at room temperature.
The ink is not intended to direct food contact.
The performance of the product and its suitability for the customers' purpose depend on the particular
conditions of use and materials being printed
. Therefore, any statement provided in this document should not be construed as providing a guarantee
of performance in a specific application area, ELNOUR C0. always recommends that customers carry
out a full evaluation of performance and safety-in-use prior to using our products in commercial
Applications.
*With the supply of any item of (FG SERIES), a statement of all tests shall be issued