HD Series

-Press Speed RM Series: - may be printed at speeds of 250 to 350m/min using the Ethyl acetate
Inks must thoroughly be stirred and homogeneous before reducing with solvent. The optimum printing
viscosity depends on press and running conditions (13-15 sec/cup4 at temp. 25). 29092 MA
*Substrate to be printed needs to have a corona treatment of min 38 dyn/cm. Since the RM1 Series is
designed for reverse printing and lamination applications, it has no scratch and rub resistant.
*Adhesion promoter added to the ink about % 3-5 ratio to increase heat and adhesion resistance. By
adding % 1 ratio of anti-scratch could give scratch and rub resistance to the ink and could be used for
surface printing applications.
*Anti-scratch added inks cannot be used for Lamination Applications.
*With the supply of any item of (RM SERIES), a statement of all tests shall be issued
Colour range: WHITE and CMYK for this ink series
Other colours can be determined from the Pantone or according to customer sample.
Stir ink in a homogenous manner before use.
Do not mix any other series of inks.
Store inks in 20-25°C conditions to avoid discoloration and viscosity problems. B nim) mil 990 besihes9.9908
Sealed drums are under guarantee for 12 months after production date
since they are kept in a dry area at room temperature.
The ink is not intended to direct food contact.
The performance of the product and its suitability for the customers' purpose depend on the particular
conditions of use and materials being printed
. Therefore, any statement provided in this document should not be construed as providing a guarantee of
performance in a specific application area. ELNOUR CO. always recommends that customers carry out a
full evaluation of performance and safety-in-use prior to using our products in commercial of toneleigen Jash
Applications.
. Please contact with elnuor representative for full technical evaluation of your application or process.